- Type fiberglassElectrical insulating
Tel .: 066 090-56-55Elektroizolyatsionnye E3-200 fabric produced from the twisted glass yarns or rovings areal density of 100 g / m2 to 250 g / m2. Designed for the manufacture of insulating material foil for printed circuit boards, base laminate, glass, circuitry for radios and computers, coating materials for thermal insulation and other building purposes. Fiberglass insulating E3-200, E3 / 2-200, EZ-100 are manufactured in accordance with GOST 19907-83, TU 6-48-39-90 TU 5952-029-00204990-2007 of yarns aluminoborosilicate glass on sizing "paraffin emulsion" and direct sizing. Insulating fabrics intended for the production of glass-reinforced plastics based on epoxy and polyester resins for the manufacture of boats, pipes, tanks for aggressive media, and many other products for the production of materials that require high strength and corrosion resistance. In addition, this material has a very high performance: non-flammable, non-flammable, does not corrode, has a high chemical and biological stability, operating temperature range of glass fabrics from -200 ° C to + 550 ° C. Good to machine cutting, stamping and drilling when working with this material. Due to the good heat-retaining ability of glass, fiberglass and fiberglass on the basis of glass fabrics and mullitokremnezemnyh materials used for thermal insulation of pipes, boiler tubes. Glass is a laminated insulating material made by mechanically bonding glyptal mica, silicon, organic, oil-bituminous adhesive varnish, followed by hot pressing, and has excellent electrical insulation properties. The marking of glass meets the designation - the letter P. This designation is a hollow fiber. The hollow fiber has a continuous aperture area of 45-50% of the cross-sectional area of the elementary fibers and size of the hole is characterized by capillarity index, which is calculated the ratio of these areas. Nonwoven fabrics and fabrics produced on the basis of hollow fibers are used as reinforcing material in the production of lightweight GRP common that are easier to 20-30%. Lightweight fiberglass used in the aircraft, mechanical engineering, shipbuilding, where necessary to reduce the weight of the structure, while maintaining strength properties. Fiberglass manufactured in rolls up to 200 m and packed in plastic film factory.