Hydraulic Tools, Stanley

Stanley Hydraulic Breakers
Stanley's line of Handheld breakers are the largest in the world. Breakers are available for any application. The Stanley Breakers feature a trouble free diaphragm accumulator and can handle system back pressures of up to 250 psi/17 bar. A handy feature on these breakers is a feathering valve to make startup and initial placement of the steel easy.

Stanley Hydraulic Chainsaws
The CS06 Underwater Hydraulic Chain Saw has the highest power to weight ratio of any chain saw on the market. Safety interlocking triggers, bucking spurs and hand guards. Safety has been designed into the CS11 with interlocking triggers, bucking spurs and hand guards on all models.
Hydraulic power doesn't require a flywheel to smooth power pulses, so there is no chain coasting when you release the trigger. Kickback is also reduced without the without the centrifugal force from the flywheel used on gas driven saws. Pigtail is not included with tool.

Stanley Hydraulic Cut Off Saw
The Stanley CO23 Cut-Off Saw was designed for underwater use but it is also a very useful tool on land as well. The CO23 uses standard 10 inch (25.4 cm) diameter abrasive or wet or dry diamond blades for cutting metals or concrete.

Stanley Hydraulic Hand Drill
The Stanley DL07 Drill is a 1/2 inch capacity drill for drilling in wood, metal, or masonry.

Stanley Hydraulic Hammer Drill
The Stanley HD45 Hammer Drill is a rotary, percussion tool for drilling in concrete, masonry, or asphalt using 736 Skil hex bits.

Stanley Hydraulic Sinker Drill
The Stanley SK58 Sinker Drill is a rotary, percussion tool for drilling in rock or concrete using 7/8 or 1 inch hex, up to 3-inch diameter, drill steel. The SK58 can drill a 3-inch hole, 20 feet deep. The SK58 uses air or water to extract chips from the hole.