Tub grinders : TG7000

Benefit: Tub is 13'(3.9m) diameter at the top. 10'(3m) inside diameter at the base, and 56.3" (140 cm) deep to allow loading of large amounts of material and reduced bridging. Bottom of tub flares out, allowing the hammermill to cut under the vertical wall of the tub, reducing bridging and allowing steady feeding of material. This highly effective placement of the mill reduces the amount of material build up causing excess wear on the table and tub. The high rotor exposure of 8" (20.3 cm) means more aggressive hammermill cuts to help provide continuous grinding and a high rate of production. Four 6" (15.2 cm) tub wall agitators move material to help reduce bridging and increase production. Tub rotation is driven by two low speed, high torque, hydraulic motors and positive chain drive for greater durability. Vertical tub walls are 1/4" (.95 cm) thick T1 steel. The tub floor is 1/2" (1.27 cm) thick T-1 steel.
Feature: Duplex Drum Hammermill
Benefit: A 31" (71cm) cutter tip diameter and 66" long mill cuts from tub wall to past the center of the 10' (3m) tub. This patented design is intended to decrease daily maintenance.
Feature: 860 or 1000 HP 3412 E Caterpillar Engine Options